An Introspective Assessment of Buckling and Second-Order Load Deflection Analysis Based Design Calculations

Analysis and Design of Noncompact and Slender Rectangular CFT Columns Subjected to Ambient and Elevated Temperature

Automated Damage Detection and Structural Modelling with Laser Scanning​

Axial Stability of Columns Composed of Combined Sigma CFS

Beedle Presentation: Cold-Formed Steel - Research to Practice

Buckling and Design of Columns with Intermediate Elastic Torsional Restraint

Buckling of FRP Long Tubes Lined with Steel Pipe under External Pressure

Cold-Formed Steel – Research to Practice

Collapse Analyses on Spirally Welded Tapered Tubes using EC3 Generated Imperfections

Constrained Finite Element Method for the Model Analysis of Thin-Walled Members with Holes

Cyclic Simulation of Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing

Discrete Bracing Displacement Compatibility Solutions for Cold-Formed C- and Z- Sections in Flexure in Torsion

Distortional Failure of Cold-Formed Steel Beams under Uniform Bending: Behavior, Strength and DSM Design

Dynamic Stability of Deep and Slender Wide-Flange Steel Columns - Full Scale Experiments

Dynamic Stability of Planar Frames Supported by Elastic Foundation

Effect of Girder Continuity and Imperfections on System Buckling of Narrow I-Girder Systems

Effect of Imperfections on Faceplate Slenderness Requirements for SC Walls

Elastic Buckling Mode Decomposition of Displacement, Strain Energy and Stress Components for Thin-Walled Structural Members

Elasto-Plastic Stress States and Reduced Flexural Stiffness of Steel Beam-Columns

Experimental Examination of Creep Buckling of Steel Columns in Fire

Experimental Studies on the Composite Action in Wood-Sheathed and Screw-Fastened Built-Up Cold-Formed Steel Columns

Finite Element Modeling Protocols and Parametric Analyses on for Short Cold-Formed Steel Zee-Section Beam Columns

Finite Element Simulation of Buckling of Extended Beam-to-Girder Shear Tab Connections under Gravity Induced Shear Force

Full Field Cold-Formed Steel Column Buckling Measurements with High Resolution Image-Based Reconstruction

Full field cold-formed steel column buckling measurements with high resolution image-based reconstruction

GBT-Based Buckling Analysis of Circular Cylindrical Steel Shells under Uniform External Pressure

GBT-Based Buckling Analysis of Thin-Walled Steel Frames with Semi-Rigid Joints

Impact of Fabrication Tolerances on Cold-Formed Steel Section Properties, Stability, and Strength

Improved Stability Design of Longitudinally Stiffened Plate Girders

Influence of Imperfections on the Local Buckling Response of Hollow Structural Shapes

Influence of Plate Stiffener Geometry on LTB Capacity

Instability of Solar Power Tower Structures during Construction

Lateral Torsional Buckling of Steel Bridge Girders

Lateral Torsional Buckling of Welded Wide Flange Beams

Local-Distortional-Global Interaction in Cold-Formed Steel Lipped Channel Columns: Behavior, Strength and DSM Design

New Component-Based Model for Single-Plate Shear Connections with Pre-tension

New Euler-type Progressive Collapse Curves for Steel Frames

Nonlinear Analyses of Stiffened Steel Plate Shear Walls Considering Gravity Effects

Progressive Collapse Resistance of Composite Steel Frame Structures under Corner Column Removal

Quantitative Determination of Elastic Buckling Modes for Cold-Formed Steel Members

Recent Developments in the GBT-Based Numerical Modeling of Steel-Concrete Composite Beams

Revisiting Web Compression Buckling for Wide Flange Sections

Shear Strength of Unstiffened Steel Plate Girders

Short-to-Intermediate Slender Pin-Ended Cold-Formed Steel Equal-Leg Angle Columns: Experimental Investigation and DSM Design

Stability Considerations for the Construction of Steel I-Girder Bridges Using the Incremental Launching Method

Stability Design of Columns with Intermediate Gravity Loads

Stability of Buried Corrugated Metal Pipe

Stability of Perforated Cold-Formed Steel Beam Columns

Stiffened Shear Diaphragm Design Requirements for Bracing of Beams

Stiffness, Stability, and Strength of Floor-to-Wall Connections in Ledger-Framed Cold-Formed Steel Construction

Strong-Axis Flexural Buckling of Cellular and Castellated Members

The Effect of Geometric Imperfections on the Flexural Buckling Strength of Tapered Spirally Welded Steel Tubes

The Impact of Girder Geometry and Bracing Details on the Stability of Steel Tub Girder

Ultimate Strength of Expanded Metal Panels Subjected to Shear Loading

Ultimate Strength of Tapered Bridge Girders Under Combined Bending and Shear