​​​

SS2 - Cold-Formed Steel Stability
 

• Web crippling investigation of CFS open built-up sections subjected to exterior one-flange loading    M Anbarasu

• Buckling Analysis of Lipped CFS Clip Angles in Beam-Column Connections Enabling Reuse    Aswin Kumar Jeyabalan

• Residual Stress Distribution in Cold-Formed Steel Channel Section    Mahendrakumar Madhavan

• Towards Establishing The Reuse Design Rules for Cold-Formed Steel Channel Stub Columns    Sivaganesh Selvaraj

​

​​S1 - Columns I
 

• A Design Method to Calculate the Critical Forces of Columns with Partially Continuous Elastic Supports    Sandor Adany

• Buckling Behavior of Laced Built-Up Steel Columns Considering Local/Global/Built-Up Interaction    Nicolas Boissonnade

​​

S2 - Floors and Roofs I

​

• Vibration Performance of an All-Steel Floor System Using Finite Element Modeling Techniques    Rajshri Chidambaram Muthu Kumar

• Fastener-based inelastic analysis of steel deck diaphragms using the instantaneous center method    Firaol Fekadu

• Probabilistic Stability Assessment of Metal Building Roof Corners Under Tornado-Induced Wind Loads    Shihang Wang

 

S3 - Stability under Elevated Temperatures I
​​

• ​Creep Buckling Behavior of Columns in Steel Moment Frames subjected to Fire    Ali Morovat

• Fire Test of a 10-Story Cold-Formed Steel Building after Earthquake: Numerical Models for Fire, Thermal, and Mechanical Analysis    Yu Niu

• Post-Fire Behaviour of Aluminum Alloy Cross-Sections    Kossi Sama

• Elevated Temperature Tests on Cold-Formed Steel Members in Compression: Effect of Member Length, Temperature Profile, and Heating Regime     Jiangyue Xie
   

S4 - Special Topics I
​

• ​Modern Stability Design Approach for Composite Members: Insights Shaping The AISC 360-22 and Future Directions    Abdull Ahalghossoon

• Strength and Stability Limits for Stainless Steel Round HSS Members under Flexure    Guven Kiymaz

• Linear Buckling Analysis for Cable Domes    Richard Joao Rosa

• Dynamic Stability Analysis of Thin-Walled Cylindrical LNG Steel Storage Tanks Subjected to Seismic Excitations    Shafqat Ullah

 

S5 - Analysis Methods

​​

• Design for Stability of Structural Steel Connections using the Component-Based Finite Element Method    Mark Denavit

• A geometrically exact beam element for thin-walled tapered members    Rodrigo Gonçalves

• An open-source triangular shell finite element software implementation for the study of thin-walled structures    Amoke Shabhari

• Optimization and sensitivity analysis in buckling problems    Nuno Peres​

 

S6 - Columns II

​

• ​Residual Axial Capacity of Square Hollow Tubular Columns after Lateral Impact while under Compressive Loading    Anil Agarwal

• O.I.C.-based design of hot-rolled steel channel sections under compression    Morane Chloe Mefande Wack

• Damage Detection and Sensor Optimzation for Stability Characterization of a Meter-Scale Origami Pill-Bug Structure    AnnSychterz

​

S7 - Floors and Roofs II

​

• ​A Unified Design Method for Overhanging Steel Girders    Vahab Esmaeili

• Understanding the Effect of Modelling Methodology on the Numerical Stability Assessment of Open Web Steel Joists    Hans Lagerquist

• Behavior of a Modular Steel Floor System Subjected to Gravity Loading    Abdelrhman Ramadan
  ​​​

​​

S8 - Stability under Elevated Temperatures II

​

• ​Cross-sectional behavior of aluminum alloy irregular rectangular hollow section stub columns after exposure to fire    Wen Cheng

• Numerical investigation of localized failure at plate thickness transitions in steel bridge girders exposed to fire    Augusto Gil

• Strength and Stability Assessment of Cold-Formed Steel Storage Rack Stub Columns After Exposure to Elevated Temperatures    Pandiri Nithish Reddy

 

S9 - Special Topics II

​

• ​Consideration of Modified Slenderness Ratio in Joist Top Chord Buckling    Kubilay Cicek

• Direct buckling resistance check of complex steel plated structures    Balázs Kövesdi

• Strain-Based Curvature and Displacement Analysis Using Distributed Fiber Optic Sensing    Monamy Mustaq

• Experimental study on the buckling behavior of aluminium members with closed cross-sectional shapes    Hoang Duong Ngoc

​​

S10 - Beedle Award

​

• A Post-buckling Journey: 25 years with the Thin-walled Structures Group    Benjamin Schafer​

 

S11 - Additive Manufacturing

​

• ​Buckling Behaviour of Additively Manufactured Equal Slender Unequal Leg Angles    Vijaya Vengadesh Kumar Jeyapragasam

• Optimization of Aluminum CHS and Polygonal Sections Using Additive Manufacturing    Juan David Orozco Sosa

• Local stability of 3D-printed stainless steel lipped angle sections under compression    Yao Sun

• Testing and design of wire-laser additively manufactured high strength steel angle sections    Pengliang Yang

​​

S12 - Bridges

​

• Influence of Elastic Buckling Characteristics on Inelastic Shear Capacity of Steel Plate Girders    Muhie Dean Ahdab

• Eigenvalue analysis of box girder cross-sections considering realistic bearing-type boundary conditions    Aritra Chatterjee

• Thermal fatigue behavior of metal roofs under heatwave conditions    Malik Farooq

​​​

S13 - Stability of High Strength Steels

​

• ​Experimental investigation of torional-flexural response of intermediately stiffened lipped channels cold-formed from 690 MPa (100 ksi) steel            Damir Akchurin

• High-Strength Cold-Formed Steel Columns Prone to Local and Local-Distortional Interactive Buckling    André Martins

• Assessment of AISC 360 Column Design Curve Using Flexural Buckling Simulations of High-Strength Steel Columns    Shahriar Quayyum

• Stability of High-Strength SpeedCore Walls: Evaluation of AISC Slenderness Limits    Tariq Sweidan

​

S14 - Frames and Systems

​

• Interior two-flange loading web crippling tests on CFS built-up I-beams composed of lipped channels    Mohammad Adil Dar

• Frame Stability Implications: When the EOR Specifies HSS Vertical Bracing Slotted End Connections    Perry Green

• LLM agent framework for structural steel design    Zhidong Zhang

Proceedings Only​

​

• Compression buckling strength of steel gusset plate in truss bridge connections    Anjan Bhowmick

• ​The residual bearing capacity of corroded steel I-beams and their failure patterns    Lakshmi Subramanian

• Cross-section design of stainless steel H.S.S.    Nathalie Fawaz

• Stability Design of Eccentrically Loaded Single Angle Struts - Codes and Practice    N. Subramanian

​

Download All

​

• Click Here to Download All Papers